EV-100 Wheel Evolution AutopilotFeatures:A complete autopilot-in-a-boxEvolution Ai for superior performanceNo calibration requiredQuick and easy installationFits most types of sailboat wheelsSimple, robust clutch engagementFor boats up to 16,500 lbs (7,500 kg)For 12V DC power systemsIncludes p70s Autopilot ControllerIncludes:EV-1 Sensor Corep70s Autopilot Control HeadACU-100 Actuator Control UnitWheel DriveEvolution Cabling KitEV Unit O-Ring Pack (set of 2)Wall Mounting BracketThe EV Sensor CoreAt the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.Features:Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics changeFlexible installation options. Mount above or below deckSimple SeaTalkng connectivity to the control head and ACUSolid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditionsFast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displaysp70s Autopilot Control HeadThe p70s is a push-button operation controller designed primarily for sailboats.Features:LightHouse user interface is simple and quick to useWide 160° viewing anglesStart up wizard helps you configure the pilot quickly and easilyAnti-reflective coating for improved visibility in bright sunlightLow power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightnessSupported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog SteerSimple system and group dimming/illuminationSupport for multiple data sourcesSeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required)ACU-100 Autopilot Control Unit (ACU)The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type.Evolution Cabling Kit1 x SeaTalkng Power Cable (0.4m)1 x SeaTalkng Backbone Cable (5m)1 x SeaTalkng Spur Cable (0.4m)1 x SeaTalkng 5-way Connector Block2 x SeaTalkng T-piece Connector2 x SeaTalkng Terminator